Activitate de cercetare cu finantare nationala

1. Contract de cercetare nr. 1084C/1993 (tema A1), beneficiar Ministerul Educatiei si Stiintei; director contract: prof.dr.ing. Sontea Sever; titlu: Studiu experimental - influenta adaosurilor de densificare a aliajelor de Cu din pulberi asupra proprietatilor fizico-mecanice si rezistentei la uzare; valoare: 3 milioane lei

2. Contract de cercetare nr. 663/10C/1996 (tema A2), beneficiar Ministerul Cercetarii si Tehnologiei; director contract: prof.dr.ing. Sontea Sever; titlu: Procese tehnologice si sisteme de prelucrare a compozitelor si materialelor electrotehnice; valoare: 6 milioane lei

3. Contract de cercetare nr. 663/10C/1996, 750/1997 (tema A2), beneficiar Ministerul Cercetarii si Tehnologiei; director contract: prof.dr.ing. Sontea Sever; titlu: Procese tehnologice si sisteme de prelucrare a compozitelor si materialelor electrotehnice; valoare: 10 milioane lei

4. Grant de cercetare, cod 544/1999 (tema 34), beneficiar C.N.C.S.I.S.; director grant: prof.dr.ing. Mangra Mihail; titlu: Studii privind elaborarea unor materiale magnetice metalice si ceramice cu aplicatii in industria constructoare de masini si industria electrotehnica; valoare: 45 milioane lei

5. Contract de cercetare nr. 663/1996, 333/1999 (tema A11), beneficiar A.N.S.T.I.; director contract: prof.dr.ing. Mangra Mihail; tilu: Materiale compozite cu polimeri, fibre textile, fire metalice, carburi, materiale magnetice metalice si ceramice realizate si din materii prime recuperate din deseuri; valoare: 7 milioane lei

6. Contract de cercetare nr. 663/1996, 333/1999 (tema A3), beneficiar A.N.S.T.I; director contract: prof.dr.ing. Sontea Sever; titlu: Pulberi ceramice, compozite cu matrice metalica sau ceramica, materiale moi ceramice, neferoase, neferoase cu destinatie speciala; valoare: 15 milioane lei

7. Contract de cercetare nr. 663/1996, 153 I/2000 (tema A11), beneficiar A.N.S.T.I.; director contract: prof.dr.ing. Mangra Mihail; titlu: Materiale compozite cu polimeri, fibre textile, fire metalice, carburi, materiale magnetice metalice si ceramice, realizate si din materii prime recuperate din deseuri; valoare: 25 milioane lei

8. Grant de cercetare nr. 35253/2001, cod 16, beneficiar C.N.C.S.I.S.; director grant: prof.dr.ing. Mangra Mihail; titlu: Studii asupra mecanismului SPS (Spark Plasma Sintering) la elaborarea unor magneti ceramici anizotropi; valoare: 42,4 milioane lei

9. Grant de cercetare nr. 33451/2002, cod 941, beneficiar C.N.C.S.I.S.; director grant: conf.dr.ing. Ciupitu Ion; titlu: Dispozitive de lucru pe masini unelte. Elemente componente realizate prin metalurgia pulberilor; valoare: 50 milioane lei

10. Grant de cercetare nr. 40202/2003, cod 727, beneficiar C.N.C.S.I.S.; director grant: prof.dr.ing. Mangra Mihail; titlu: Cercetari privind sinterizarea cu incalzire cu microunde; valoare: 82,5 milioane lei

11. Grant de cercetare nr. 33062/2004, cod 315, beneficiar C.N.C.S.I.S.; director grant: conf.dr.ing. Gheorghe Stefan; titlu: Studii privind tehnologia de fabricare a unor materiale sinterizate antifrictiune pe baza de cupru cu continut redus de staniu; valoare: 100 milioane lei

12. Grant de cercetare cod 108/2005, beneficiar C.N.C.S.I.S.; director contract: prof. Mangra Mihail; titlu: Cercetari asupra elaborarii otelurilor carbon sinterizate din amestecuri de pulberi de fier si nanopulberi de cementita; valoare: 200 milioane lei

Activitate de cercetare cu finantare internationala

1. Programul Cadru 6 (PC6), FP6-013908/2005-2007, beneficiar Comisia Europeana; coordonator proiect: Chalex Ltd., Anglia; titlu: Imbunatatirea cunoasterii privind impactul nanoparticulelor asupra sanatatii umane si mediului; valoare: 700.000 Euro

Publicatii

• Lucrari stiintifice publicate la simpozioane si conferinte internationale

1 CIUPITU, I., Sontea, Sever, Dragnei, Mihai - Cercetari privind posibilitatile de obtinere a unor piese mecanice pentru dispozitive utilizate la prelucrarea prin aschiere, MATEHN *98, Second International Conference on Materials and Manufacturing Technologies, 10-13 September, 1998,Cluj-Napoca, pg. 537-542;

2 CIUPITU, I., Sontea, Sever, Didu, Marin - Aspecte privind variatiile dimensionale ale pieselor presate din amestec de pulberi de, fier, cupru, grafit, TMCR*99 Tehnologii moderne, calitate, restructurare, Chisinau, Moldova, 27-29 Mai 1999, pg. 51-54;

3 Dumitru, N., CIUPITU, I.- Theoretical and experimental contributions to the modelling of the biological robots. RAAD 99/ 8th International Workshop on Robotics in Alpia-Adri-Danube Region, Munchen, Germania, 17-19 Iunie 1999, pg. 339-344;

4 CIUPITU, I., Sontea, Sever, Didu, Marin - The caracterization of presability and sintering of the mixtures from iron and cooper and added graphite, 2 National Powder Metalurgy Conference with International Participation, Ankara, Turcia, 15-17 Septembrie 1999, pg. 149-154;

5 CIUPITU, I., Sontea, S., Didu, M., Deliu, Ghe. - The studies concerning presability and sintering of the mixtures from iron powders and metalic carbides, DF PM 99, International Conference Deformation and Fracture in Structural PM Materials, Piestany, Slovacia, 19-22 Septembrie 1999;

6 CIUPITU, I., Sontea, S., Didu, M. - The mechanical characteristics for ferrous sintering alloys, EUROMAT 99- European Congres on Advanced Materials and Processes, Munchen, Germania, 27-30 Septembrie 1999;

7 CIUPITU, I., Dumitru, N., Didu, M., Gheorghe, S. - Cast iron powder with iron mixed with copper aditions. 10th Proceedings of the International Metallurgy and Material Congress, Istambul, Turcia, 24-28 Mai 2000, vol. III, pg. 1789-1796;

8 Didu, M., CIUPITU, I., Teisanu, C. - Magnetic separation of metallic powders in liquid medium. 10th Proceedings of the International Metallurgy and Material Congress, Istambul, Turcia, 24-28 Mai 2000, vol. III, pg. 1769-1772;

9 Gheorghe, S., CIUPITU, I. – The friction behaviour of some copper based alloys. 10th Proceedings of the International Metallurgy and Material Congress, Istambul, Turcia, 24-28 Mai 2000, vol. II, pg. 919-924;

10 Gheorghe, S.,Gingu, O., CIUPITU, I. - Pb content and sintering temperature influence on the dimensional change of CuSnZnPb sintered parts. RoPM 2000 - Second International Conference on Powder Metallurgy, Cluj-Napoca, 6-8 Iulie 2000, pg. 775-778

11 CIUPITU, I., Sontea, S., Mangra, M., Gheorghe, S. Mechanical tests on Fe - SPEED STEEL - Cu - Graphite sintered parts. RoPM 2000 - Second International Conference on Powder Metallurgy, Cluj-Napoca, 6-8 Iulie 2000, pg. 579-584

12 CIUPITU, I., Sontea, S., Didu, M. - Termochemical treatments on Fe-Cu-Graphite sintered parts. RoPM 2000 - Second International Conference on Powder Metallurgy, Cluj-Napoca, 6-8 Iulie 2000, pg. 431-436

13 Didu, M., CIUPITU, I., Dumitru, C. - Special equipaments for the magnetic separation of the recovered powders. RoPM 2000 - Second International Conference on Powder Metallurgy, Cluj-Napoca, 6-8 Iulie 2000, pg. 443-448

14 Dumitru, N., Cherciu, M., CIUPITU, I. - About dynamical-modal analysis of the cylindrical gear. 5th International Conference on BOUNDARY and FINITE ELEMENT, 25-27 May 2000, University of Oradea, ROMANIA, pg.106-113.

15 Gheorghe, S.,Mangra, M.,Gingu, O., CIUPITU, I. - Radial crushing test of some Cu-based antifriction alloys using finite element method.-2000 Powder Metallurgy World Congres,12-16 November,2000,Kyoto,Japan,pg.147.

16 CIUPITU, I., Mangra, M., Gheorghe, S., Gingu, O. - Cast iron powder in mixtures. Mechanical tests. 2000 Powder Metallurgy World Congres, 12-16 November, 2000, Kyoto, Japan, pg.185.

17 CIUPITU, I., Mangra, M., Gheorghe, St., Teisanu, C., - Study on wear guiding buches of drills - 2nd World Tribology Congress, 03 - 07 September, 2001, Vienna, Austria, pg. 642.

18 Mangra, M., Sima, G., Gingu, O., Teisanu, C., CIUPITU, I., Gheorghe, St. -Tribological composite materials for the automative industry. Physical and mechanical characteristics - 2nd World Tribology Congress, 03 - 07 September, 2001, Vienna, Austria, pg. 491.

19 Gheorghe, S., Mangra, M., CIUPITU, I., Gingu, O. - The influence of the manufacturing factors of the cooper base sintered parts on wear strength. - 2nd World Tribology Congress, 03 - 07 September, 2001, Vienna, Austria, pg. 138.

20 Gingu, O., Sima, G., Mangra, M., CIUPITU, I. - Wear behavior of Al/SiC composites depending on PM route manufacturing. - 2nd World Tribology Congress, 03 - 07 September, 2001, Vienna, Austria, pg. 137.

21 Teisanu, C., Sontea, S., Mangra, M., CIUPITU, I., Tudor, A. - Tribological behavior and characteristics of sintered iron based alloys. - 2nd World Tribology Congress, 03 - 07 September, 2001, Vienna, Austria, pg. 136.

22 CIUPITU, I., Dumitru, N., Gheorghe, St., Teisanu, C.,- Static analysis of the guiding bearing drill contact by finite element method.-Proccedings of the International Conference on Advanced Materials Processing Technologies, AMPT 01, vol. II, 18-21 september, 2001, Leganes, Madrid, Spania, pg. 737.

23 Teisanu, C., CIUPITU, I., Mangra, M., Gheorghe, St.- The microstructure influence on mechanical properties of the sintered iron base alloys.- Proccedings of the International Conference on Advanced Materials Processing Technologies, AMPT 01, vol. II, 18-21 september, 2001, Leganes, Madrid, Spania, pg. 1607.

24 Gheorghe, St., Mangra, M., CIUPITU, I., Porojan, A. - Sintered antifriction alloys. Experimental Methodology for optimal radial crushing strength determination.- Proccedings of the International Conference on Advanced Materials Processing Technologies, AMPT 01, vol. II, 18-21 september, 2001, Leganes, Madrid, Spania, pg. 1599.

25 Mangra, M., Sima, G., Gingu, O., CIUPITU, I. - Influence of the cooling rate on Al/SiC +Graphite composite microstructure. - Proccedings of the International Conference on Advanced Materials Processing Technologies, AMPT 01, vol. II, 18-21 september, 2001, Leganes, Madrid, Spania, pg. 1547.

26 CIUPITU, I., Dumitru, N., Teisanu, C., Gheorghe, St. - Choice of Parameters Optimisation of Sintering Technology of Samples made of Iron, Cooper and Graphite Mixture Powder.-European Congress and Exhibition on Powder Metalurgy,Nice, France, 22-24 octombrie 2001, pg. 292-296.

27 Gheorghe, S., CIUPITU, I., Mangra, M., Teisanu, C. - Wear Resistant Alloys with Low Tin Content, European Congress and Exhibition on Powder Metalurgy,Nice, France, 22-24 octombrie 2001.

28 Teisanu, C., CIUPITU, I., Mangra, M. - Effect of Sintering Temperature on Iron Base Antifriction Alloys, European Congress and Exhibition on Powder Metalurgy,Nice, France, 22-24 octombrie 2001, pg. 351-355.

29 CIUPITU, I., Dumitru, N., Teisanu, C., Gheorghe, St. - Dynamic analysis of the guiding bush by finite element method, Procedings of the International Conference-Deformation and fracture in structural PM materials DFPM 2002, Stara Lesna, Slovacia,15-18 sept. 2002,pg.210-213;

30 Didu, M., Teisanu, C., Dumitru, C., CIUPITU, I. - Hot plastic strain of some high strength parts made of recycled steel powder, Procedings of the International Conference-Deformation and fracture in structural PM materials DFPM 2002, Stara Lesna, Slovacia,15-18 sept. 2002,pg.184-187;

31 Teisanu, C., Mangra, M., Didu, M., Gheorghe, St., CIUPITU, I. - The influence of addition elements on sintered iron compacts microhardness, Procedings of the International Conference-Deformation and fracture in structural PM materials DFPM 2002, Stara Lesna, Slovacia,15-18 sept. 2002,pg.188-192;

32 Teisanu C., Mangra M., Pascu I., Gheorghe St., CIUPITU, I. – The effect of alloying elements on the mechanical properties of PM Fe-Cu based antifriction alloys. Second International Conference on Advanced Materials and Structures AMS 2002, Timisoara, September 19-21, 2002, Romania, pg. 355.

33 CIUPITU, I., Mangra M., Teisanu C., Gheorghe St. – PM Guiding bearings. Dimensional accuracy and roughness. Second International Conference on Advanced Materials and Structures AMS 2002, Timisoara, September 19-21, 2002, Romania, pg. 101.

34 Mangra, M., CIUPITU, I., Nicoara, V. – Studies regarding the SPS manufacturing of the oxide ceramic magnets. Second International Conference on Advanced Materials and Structures AMS 2002, Timisoara, September 19-21, 2002, Romania, pg. 237-240.

35 CIUPITU, I., Calbureanu M., Teisanu C.- Punch stresses and deformations analysis using finite element method- International Conference on Materials Science & Engineering – Bramat 2003, 13-14 Martie, Brasov, Romania, pg. 87-92;

36 Calbureanu M., CIUPITU, I., Teisanu C. - Bushing stresses and deformations analysis using finite element method - International Conference on Materials Science & Engineering – Bramat 2003, 13-14 Martie, Brasov, Romania,pg.92-98;

37 Teisanu C., Didu M., CIUPITU, I., Calboreanu M. – Sintering parameters influences on the iron base self-lubricating bearing porosity - International Conference on Materials Science & Engineering – Bramat 2003, 13-14 Martie, Brasov, Romania, pg.158 - 163;

• Lucrari stiintifice publicate in reviste

38 Dragnei, M., CIUPITU, I., Blejdea, L. - Contributii privind realizarea unor dispozitive din elemente modulare pentru prelucrarea reperului port-perie. Analele Universitatii din Craiova, seria MECANICA, Craiova, nr.8 / 1988, pg. 6 - 9 ;

39 Dumitru, N., Vatu, D., CIUPITU, I. - Despre calculul angrenajelor prin metoda elementului finit. Analele Universitatii din Craiova, seria MECANICA, Craiova, nr.1 / 1998, pg. 71 - 76 ;

40 Didu, M., Gheorghe, S., CIUPITU, I. - Contributii privind reciclarea aschiilor mici rezultate la rectificarea unor oteluri slab aliate. Analele Universitatii din Craiova, seria MECANICA, Craiova, nr.1 / 1998, pg. 254 - 256 ;

41 CIUPITU, I., Sontea S., Didu M. - Caracterizarea pulberii metalice obtinuta prin dezintegrarea cu apa sub presiune a metalului topit, din otel rapid recuperat, Analele Universitatii din Craiova, seria MECANICA, Craiova, nr.1 / 1998, pg. 293 - 298 ;

42 Vaduvoiu, Gh., Sontea, S., CIUPITU, I. – Particularitati privind sudarea cu arc electric a pieselor din otel obtinute prin tehnica metalurgiei pulberilor. SUDURA, Ed. Sudura , TimiSoara, nr. 4 / 98, pg. 51-58;

43 Dumitru, N., CIUPITU, I. - Modelarea computationala a angrenajelor cilindrice. Analele Universitatii din Craiova, seria MECANICA, Craiova, nr.1 / 1999, pg. 130 - 135 ;

44 Gheorghe, S., CIUPITU, I. – Cu privire la comportarea la strivire radiala a aliajelor antifrictiune pe baza de cupru. Analele Universitatii din Craiova, seria MECANICA, Craiova, nr.1 / 1999, pg. 444 - 449 ;

45 Didu, M., CIUPITU, I. – Placute din aliaje cu puncte de topire joase utilizabile la detectoare de incendiu. Analele Universitatii din Craiova, seria MECANICA, Craiova, nr.1 / 1999, pg. 450 - 453 ;

46 CIUPITU, I., Sontea, S., Mangra, M. - Studii privind incercarile mecanice ale probelor realizate din amestec de pulberi de otel rapid, fier, cupru si grafit, Analele Universitatii din Craiova, seria MECANICA, nr. 1/1999, Craiova, 454-459;

47 CIUPITU, I., Dumitru, N., Mangra, M. - Optimizarea alegerii parametrilor tehnologiei de sinterizare a probelor din amestec de pulberi de fier, fonte Si cupru, Analele Universitatii din Craiova, seria MECANICA, nr. 1/1999, Craiova, 460-465;

48 CIUPITU, I., Sontea, Sever - Studii privind presabilitatea pulberii de otel rapid simpla si in amestec cu pulberi de fier, cupru si grafit, Acta Universitatis Cibiniensis, Issued for BEYOND 2000 Internacional Conference, Vol. XXXIV,Technical series, Sibiu, 1999, pg. 51-54;

49 Didu, M., CIUPITU, I. - Cercetari cu privire la imbunatatirea unor caracteristici tehnologice ale pulberilor din otel recuperate din Slam, Acta Universitatis Cibiniensis, Issued for BEYOND 2000 Internacional Conference, Vol. XXXIV,Technical series, Sibiu, 1999, pg. 73-76;

50 CIUPITU, I., Sontea, Sever, Didu, Marin, Gheorghe, Stefan - Samples of cast iron powders mixtures, Dimensional variations, Buletinul Institutului Politehnic Iasi, Tomul XLVI (L), Supliment II, Sectia Constructii de masini, pg. 17-20, 2000;

51 CIUPITU, I., Didu, M., Teisanu, C, Matrite pentru bucse sinterizate. Dimensionare si verificare, Analele Universitatii din Craiova, seria MECANICA, nr. 1/2000, Craiova, 119-126;

52 Didu, M., CIUPITU, I., Teisanu, C, - Caracteristici tehnologice si mecanice ale unor pulberi de otel recuperate din Slam, ameliorate cu pulbere de fier, Analele Universitatii din Craiova, seria MECANICA, nr. 1/2000, Craiova, 135-140;

53 Teisanu, C., Sontea, S., Didu. M., CIUPITU, I. – Modificari dimensionale la sinterizarea amestecurilor de pulberi pe baza de fier, Analele Universitatii din Craiova, seria MECANICA, nr. 1/2001, Craiova, 223-230;

54 CIUPITU, I., Didu, M., Teisanu, C. - Studies on dimensional variations of sintered powder mixtures samples, Revista “Tehnologii neconventionale - prezent si perspective”, Editura Augusta Timisoara, 2001, pg. 88;

55 Didu, M., CIUPITU, I., Teisanu, C. - The influence of the content of ceramic materials about the phisic-mecanical characteristic of the frictional composite, Revista “Tehnologii neconventionale – prezent si perspective”, Editura Augusta Timisoara, 2001, pg. 94;

56 CIUPITU, I., Mangra, M., Didu, M., Teisanu, C - Termochemical treatments on cast iron powder with iron mixed with cooper additions sintered parts, Buletinul Institutului Politehnic Iasi, Tomul XLVIII (LII), Fasc. 3-4, 2002, pg. 277

57 CIUPITU, I., Mangra, M.,Gheorghe, St., Teisanu, C. - Guiding bush obteined of Powder Metalurgy, Acta Technical Napocensis 45 (2002) 635-640;

58 Teisanu, C., Didu, M., Ciolacu, F., CIUPITU, I., Gheorghe, St. - Dimensional changes of some iron base sintered alloys, Acta Technical Napocensis 45 (2002) 629-634;

59 CIUPITU, I., Dumitru, N., Gheorghe, St., Teisanu, C., - Static analysis of the guiding bearing drill contact by finite element method.-Journal of Materials Processing Technology, Elsevier 2003

Carti

1. Al. Neagu, I. CIUPITU - "Tehnologia presarii la rece" - indrumar de proiectare, Reprografia Universitatii Craiova, 1987, 200 pag.

2. Al. Stanimir, M. Didu, I. CIUPITU - "Tehnologii neconventionale" - indrumar de laborator, Reprografia Universitatii Craiova, 1987, 100 pag.

3. D. Mutu, Al. Neagu, I. CIUPITU - "Tehnologia deformarilor plastice a metalelor" - indrumar de laborator, Reprografia Universitatii Craiova, 1992, 120 pag.

4. I. CIUPITU - Deformari plastice. Tehnologii si echipamente - curs, Reprografia Universitatii Craiova, 2000, 235 pag.

5. D. Bardac, I. CIUPITU, D.O. Bucur - Tehnologii de fabricare a filetelor prin deformare plastica la rece , Editura Universitaria Craiova, 2000, 170 pag.

6. I. CIUPITU - Studii privind utilizarea metalurgiei pulberilor in constructia dispozitivelor, Editura Universitaria Craiova, 2001, 215 pag.

7 O. Gingu, I. CIUPITU, G. Sima, St. Gheorghe - Tehnologa fabricarii pieselor din pulberi, - curs, Reprografia Universitatii Craiova, 2001, 120 pag.

8 M. Mangra, O. Gingu, St.Gheorghe, I. CIUPITU, C. Teisanu, G. Sima -Tehnologii si aplicatii in metalurgia pulberilor, Editura Universitaria Craiova, 2002, 276 pag.

9. I. CIUPITU - Deformarea plastica la rece – Craiova, Editura Universitaria, 2004, 319 pag.

10. I. CIUPITU – Stante si matrite. Elemente de proiectare – Craiova, Editura Universitaria, 2004, 269 pag.

Editor la jurnale/reviste sau conferinte

• membru al colectivului de redactie al Revistei de Inginerie Industriala (Review of Industrial Engineering), editata de Facultatea de Ingineria si Managementul Sistemelor Tehnologice, Drobeta Turnu Severin, Romania

• referent stiintific al Revistei de Inginerie Industriala (Review of Industrial Engineering), editata de Facultatea de Ingineria si Managementul Sistemelor Tehnologice, Drobeta Turnu Severin, Romania

• Actiuni PC6

17.Ian.2005: Info-day FP6/prioritatea 3, Biblioteca Academiei Romane, Bucuresti, Romania

18.Ian.2005: Seminar Nanostiinte si Nanotehnologii, Biblioteca Academiei Romane, Bucuresti, R omania

• Scoli de vara, workshop-uri

20-22 Iulie 2002: Scoala de Vara UNIversitatea in SOcietate – UNISO 2002, Drobeta Turnu Severin, Romania; organizatori: Ministerul Educatiei si Cercetarii, Agentia Nationala pentru Parteneriatul dintre universitati si mediul economico-social si participarea Romaniei la programul Tempus III (APART), Universitatea din Craiova, Universitatea de Medicina si farmacie “Iuliu Hatieganu” din Cluj-Napoca, Universitatea din Rouen – Franta (membru al comitetului de organizare)

23-25.Sept. 2004: Workshop Standarizarea Calificarilor in Invatamantul European de Navigatie QUEENAV 2004, Drobeta Turnu Severin, Romania; organizatori: Facultatea de Ingineria si Managementul Sistemelor Tehnologice din Drobeta Turnu Severin, Autoritatea Navala Romana, Ministerul Transporturilor (membru al comitetului de organizare)

• Programe europene

Feb. 2004: participare in cadrul programului SOCRATES la Universitatea Politehnica din Torino, Italia