Elaboration and Processing of Advanced Materials
1. CNC machine for materials machining FADAL VMC 2216FX
Characteristics:
- PC system for positioning and control
- High quality and high speed processing
- Ferous and non-ferous metals, polymers, wood
- Processing speed: 8.000 rpm, 20.32m/min
- Positioning precision: 0.005mm
- Execution precision: 0,01mm
- Types of products: Prismatic pieces, 3D complex models, Dies, injection dies, Electro-erosion electrodes, Prototypes
2. Planetary mill Pulverisette 4,6 (1 or 2 recipients)
Characteristics:
- Variable rotation of the plate and of the recipient
- Milling mode: by friction / by impact
- Rotation: 0-400 rpm
- Initial dimension, max: 10 mm
- Final dimension (thin): < 1 µm
- Capacity of the recipient: 2 x 225 ml
- Milling environment: air, neutral, criogenic;
- Monitoring of temperature and pressure
3. Nanoparticle Analysis System NANOSIGHT LM10
Characteristics:
- Laser: class 1, 635nm CW, max power 20mW
- Vizualization, measurement and grain distribution 10-800nm;
- Analysis of any type of particle in any solvent
- Aplications: metals, ceramics, cosmetics, pharmaceuticals
- Measurement: Number of particles, Distribution in volume, Distribution on surface
4. 90 Plus Particle Size Analyzer BROOKHAVEN
Characteristics:
- Laser: 15mW solid laser
- Accuracy: ±1 – 2 % with monodispersed probes;
- Measurement time: 1-2 minutes
- Range: 2 nm-3µm;
- Aplications: chemical industry, cosmetics, pharmaceuticals
5. CSM Instruments Tribometer and Profilometer
Characteristics:
- High resolution due to the design of the friction force sensor;
- Simply to calibrate;
- Calibrated tool for friction and wear;
- Heating probe is added option (up to 1000 ºC);
- Testing liquids, humidity control, controlled environment
6. Injection Moulding Machine GOCERAM
Characteristics:
- Cavity volume: 0.020-200 cm3
- Speed of injection: 0.4 - 100 cm³/s;
- Injection time: 0.6 sec - 60 min;
- Active time: up to 360 cycles/hour;
- Servo-motor as actuator for the piston movement
7. Microwave heating installation MUEGGE
Characteristics:
- Magnetron 0,4 kV, 2.45 GHz
- Anodic voltage: 3,5 kV;
- Max power: 2 kW constant, 4 kW pulsed
- Impedance Acorder: 6 kW, 2.45 GHz type TRISTAN
8. Arc welding equipment (MMA, TIG, MIG/MAG)
Characteristics:
- AIR LIQUIDE Filcord 260 MC (260A, d=0.8-1.0 mm);
- AIR LIQUIDE PRESTO 165 PLUS (160A, 26,4V);
- OERLIKON CITOLINE 1700 M (170A, d=0.8-1.0 mm);
- OERLIKON SAXO TIG 160 AC/ DC (150A, 80V);
9. Resistance spot welding machines TECNA 4640, TECNA 7903
Characteristics:
- Nominal power at 50%: 16 kVA
- Max power/current: 35 kVA/10 kA
- Min/Max electrodes : 230 / 550 mm
- Displacement: 8...44 mm
10. Nd-YAG Laser Machine LASAG
Characteristics:
- Max power: 200 W
- Frequency of pulse: 5 kHz
- Processing precision : < 20 mm
- Max thickness of base material: 2 mm
11. Stud welding machine TSW 1500
Characteristics:
- Diameter of the stud: 2.5-8.0 mm
- Voltage input: 230 V c.a.
- Max current: 5 A
- Loading time: 1-3 s
12. Welding truck
Characteristics:
- Voltage input: 230 V c.a.
- Max speed: 5.0 m/min
- Vertical displacement of the welding head: 20 mm
13. Oxy-gas welding and cutting kit Messer-Griesheim
Characteristics:
- Full kit: 6 heads for welding and 1 head for cutting
- Device for the mechanization of the cutting process;
- Device for circular operation
- Cleaning tools
14. Bhutan soldering kit PROS KIT
Characteristics:
- 3 soldering heads
- Buthan torch.;
- Auxiliary tools for soldering
- Lighter
15. Micro-milling machines PROXXON MF70, MICROMOT 50-E
Characteristics:
- Voltage input: 230 V c.a.;
- Rotation: 0-2000 rot/min; 5000-20000 rot/min
- Power: 100 W; 40W
- Displacement table: 200 x 70 mm
16. Furnaces for heat treatments and sintering processes
Characteristics:
- Furnace L120 (resistive heating, max temperature: 1200oC);
- Furnace Automatica (silicium carbide bars max temperature 1500oC);
- Furnace KO II (super-kantal bars, max temperature 1500oC);
- IR monitoring of temperature, digital controller of heating
17. Soldering station PROS KIT 608-352
Characteristics:
- Digital regulation
- Temperature : 165...400 ºC;
- Power: 50 W
- Interchangeable head
Testing, Examination, Analysis
1. Universal testing machine LBG
Characteristics:
- Max force: 100 kN;
- Tensile test, Bending test, Compression test
- Resolution: 0.001 kN
- Min/Max speed: 0.1-450 mm/min
- PC command and record
2. Electro-hydraulic press OMC 164
Characteristics:
- Max force: 1000 kN;
- Compression, Bending test
- Voltage input: 400 V c.a.
- Electro-hydraulic
3. Microscopes and stereo microscopes
Characteristics:
- MOTIC - stereo;
- OPTECH - stereo
- CETI – metallographic, CCD camera added, analysis software
4. Micro-Vickers hardness testing on PC
Characteristics:
- Vickers Diamond Indenter
- Magnitude: 10x, 40x;
- Force: 10-1000 g
- Microscope with analogic reading;
- Automatic control of the force loading
5. Derivatograph MOM
Characteristics:
- Max temperature:1500oC
- Thermogravimetric analysis;
- PC recording
- Ultra-precised analytical balance
6. PH-meter HANNA Instruments
Characteristics:
- pH Measurement Range: -2 – 16, 2000-16000 mV, -9.9 – 120 oC
- Resolution: 0.01;
- Precision: 0.01
- Automatic compensation;
- Temperature sensor
- PC connector RS 232, software
7. Systronic Messtechnik Multilyzer NG Gas detector and analyser
Characteristics:
- Sensors for O2, CO, NO, SO2
- Pitot tube 500 mm;
- Humidity sensor
- Temperature sensor;
- PC connector RS 232, software, recording measurements
8. Systronic Messtechnik Multilyzer NG thermo-hygrometer FT3
Characteristics:
- Range for temperature: 40-120oC
- Range for humidity: 0%rF – 100%rF;
- PC connector RS 232, software, recording measurements
Auxiliary Support Equipment
1. Power sources for electronics
Characteristics:
- Mono- double sources
- Continuous and alternative current;
- Analog and digital
- Continuous or stepping adjustment
2. Measurment instruments for electric / non-electric parameters
Characteristics:
- Digital Multimeters
- Power-meter;
- Digital RLC bridge
- Sygnametrics data aquisition board;
- IR temperature measurement digital instruments
- Measurement instruments for mechanics
- Digital balances
3. Metkon system for preparing the specimens for microscopic analysis
Characteristics:
- Full system for cutting and preparation of specimens
- Resine inserting;
- Digital adjustments